How to Remove Auto Scratch

Auto paint scratch remover, auto body repair shop, remove scratches car bodywork

It requires patience and time to remove any auto scratch. Small scratches do not matter much and can be removed by you with some patience and awareness. However if you want the auto scratch removed in such a way that it will be difficult to detect after it is done, then you will have to take the help of professional auto body mechanic to get the best results. If you want know how the auto body professionals go about auto scratch removal process, just read on.

Preparing the area

Auto scratch removal is not just applying paint over it; the scratch area has to be made smooth so that when the final paint is applied it adheres to the surface seamlessly. With the use of sandblaster or grinder the scratch area is made smooth with some of its surrounding areas. Some hand sanding with very fine sandpaper is done to refine the surface some more.

After the process of sanding is done the surface is thoroughly cleaned in order to remove any dust and other contaminants. This is done with a tack cloth and metal conditioner, sometime wax and grease removers may also be used.

Paint color matching

After cleaning, applying the paint is the next step. This part is a bit difficult as matching the exact color with the car’s present color is not easy. Only a professional auto body repair shops have to facility of mixing paints in order to get any shade that is required. Otherwise get an exact match is difficult to get from the retail market as car manufacturers use paints that are especially made for them. This color matching is the main reason that an auto scratch removed by professional auto body repair shop come out so superior than the one done by DIY.

Apply the paint

The surrounding area of the scratch on the body is covered with newspaper and masking tapes. Then with the help of a compressed air gun a primer is lightly sprayed on the scratch area and left to dry. If the scratches have been too deep exposing the metal of the car then a few more coats of primer have to be applied. After the primer has dried, the paint is then sprayed on the affected area. Very thin layers are sprayed one after the other until the color reaches the proper depth and matches with the rest of the body color. In case the depth gets more, some sanding will be required to bring down the depth and form a seamless repair. A layer of clear coat paint is applied on the finished work for long time effect.

For very tiny scratch you would like to repair auto scratch yourself, you can follow the above steps to get the auto scratch repaired.